Gypsol HTC Screed
We manufacture our Gypsol HTC to the exact standards in quality-assured facilities located in Perth Western Australia .
Because we produce this product from high-quality Gypsol anhydrite binder, specially selected sands and clean water, it offers the user a simple and effective floor screeding solution. This reasoning is especially valid for floating, unbonded or fully bonded applications which contain underfloor heating and where you need a subsequent floor covering.
Your screed benefits
Using Gypsol HTC will benefit your screed floor because of:
- Rapid application
- Unrivalled thermal performance
- Up to 2.5W/mK thermal conductivity
- Up to 25% improvement in COP
- Reduced depth
- Reduced operating energy
- Higher output
- Up to 94% lower Carbon Emissions
- Thin Screed sections
- 40mm Floating Commercial
- 35mm Floating Domestic
- 30mm Unbonded
- 25mm Bonded
- 20mm cover to underfloor heating pipes/cables
- Fast drying
- 28 days natural drying*
- 13 days forced drying*
- Is also available in Rapide format for even quicker drying times
- Rapid commissioning of underfloor heating
- Underfloor heating can be commissioned and run after just seven days
- No reinforcement nor fibres required
- No curing agents required
- Low Carbon Footprint
- Gypsol Binder produces just 26.26kg per tonne of material manufactured saving up to 94% CO2 compared to cement-based screed.
- Fully self-compacting and high density
- Offers 80kg/m2 density at just 40mm
- Rapid return to service of work areas
- Foot traffic after only 48 hours
- Full loading after just seven days
- Assured high strength
- Minimum Ca-C30 – F5